BHJProducts.com - High Performance Engine Builder Tooling and Harmonic Dampers
Part No: RLG-1
The RLG-1 Connecting Rod Length Gauge allows you to measure connecting rod length quickly and accurately. The dial indicator is first set to zero using an application specific length standard or a connecting rod with a qualified length.
The connecting rod to be measured is then placed on the fixture with its wrist pin installed. The wrist pin is swept past the dial indicator and the rod is quickly measured as a plus or minus reading from the calibrated zero setting.
The RLG-1 will accept most connecting rods, with a center-to-center range of 5"-8" and a journal end I.D. range of 2.1"-2.75". The RLG-1 includes a precision dial indicator and one application specific length standard. Additional Length Standards are available for most connecting rods. Optional slip-fit wrist pins are also offered for press-fit type connecting rods.
Note: The RLG-1 requires 100 psi minimum air supply.
The RLG-1 Rod Length Gauge was used for this Hot Rod Magazine story: Don't Bother Building Factory Aftermarket Connecting Rods
