BHJ Products Home Page

Engine Blueprinting
Honing Plates
Engine Block Tooling
Cylinder Head Tooling
Valvetrain Tooling
Rotating Assembly Tooling
Chassis Tooling
Measuring Instruments
Lifter Bushings
Harmonic Dampers

Specials & Spotlights
Clearance Items
Instruction Sheets
Tech Information

Terms & Conditions   Contact Us

  Join BHJ on Facebook  BHJ on Instagram  Share or Print This Page 
BHJ accepts Visa MasterCard and American Express

Rotating Assembly Tooling

Connecting Rod Length Gauge
Back to Previous Page

BHJ Connecting Rod Length Gauge

Part No: RLG-1 RLG, RLG1

The RLG-1 Connecting Rod Length Gauge allows you to measure connecting rod length quickly and accurately. The dial indicator is first set to zero using an application specific length standard or a connecting rod with a qualified length.

The connecting rod to be measured is then placed on the fixture with its wrist pin installed. The wrist pin is swept past the dial indicator and the rod is quickly measured as a plus or minus reading from the calibrated zero setting.

The RLG-1 will accept most connecting rods, with a center-to-center range of 5"-8" and a journal end I.D. range of 2.1"-2.75". The RLG-1 includes a precision dial indicator and one application specific length standard. Additional length standards are available for most connecting rods. Optional slip-fit wrist pins are also offered for press-fit type connecting rods.

(Note: The RLG-1 requires 100 psi minimum air supply.)

The RLG-1 rod length gauge was used for this Hot Rod Magazine story: Don't Bother Building Factory Aftermarket Connecting Rods

Contact us for tech and pricing.

Back to Previous Page

  Terms & Conditions   Contact Us